UH-24 24 Inch Universal Hemmer with Flat Hem and Hem Kick

Our Universal Hemming (UH) machines are real time savers to your production requirements allowing you to form Hems, Hem & Kick, and Pipe Lock for commercial down spouting.

The “Universal Hemming” Machines offer Dual Sided Hemming with ½” Flat Hem or Tear Drop Hem and the Hem & Kick with a 5/8” Kick Out with ½” Hem tooling included in the base machine. Built with “symmetrically designed tooling” to have your profile forming on the top or the bottom of the coil. Interchange the tooling, i.e., form Flat Hem on one side and Kick Out w/ Hem on the other. AC Drive Motor System (Sheet Fed / No Shear), adjustable coil stock width of 8” to 24”, variable to 80 FPM speed, 220 Volt 3 Phase power.

NOTE: Quick Change tooling in base machine (No hardware, No wrench, spring loaded push/pull pins)

Add to quote
Category:
Description

Product Video

Standard Features

  • AC Drive Motor – variable to 80 FPM
  • 220 Volt 3 Phase Power
  • Sheet Fed / No Shear
  • 8″ to 24″ Coil Stock Width
  • 22 – 29 gauge Painted Steel
  • .032-.040 Painted Aluminum

Standard Profiles

Double Sided Flat Hems

Double Sided Flat Hems

(click diagram thumbnails to enlarge dimensions)

Optional Profiles

Hem and Kick

Hem and Kick

Tear Drop

Pipe Lock

(click diagram thumbnails to enlarge dimensions)

Options & Accessories

Slitting Knife

Perforation Dies

  • Each Additional Set of “Quick Change” Tooling
  • Double Sided ¾” Kick Out w/ 5/8″ Return Hem
  • Double Sided “Pipe Lock”
  • ½” “TEAR DROP” Hem Tooling for the 28 – 29 gauge Grade E
  • 80 ksi Painted Steel (Stages 7 to 10 L/R)
  • Slitting Knife (1) for increased production
  • Perforation Dies (2) sets maximum
  • Optional Oiler Kit for above Perf Dies
  • Small Stiffening Ribs (2) Quick Release style
  • Machine Stand w/ Leveler Pads
  • Add Front End MANUAL Rotary Shear
  • Add AC Drive GEM Digital Controller

Related products

UH-36 36 Inch Universal Hemmer with Flat Hem and Hem Kick

Our Universal Heming machines are real time savers to your production requirements allowing you to form Hems, Hem & Kick, and Pipe Lock for commercial down spouting. Fabricate metal on your schedule and not someone else’s!

The “Universal Hemming” Machines offer Dual Sided Hemming with ½” Flat Hem or Tear Drop Hem and the Hem & Kick with a 5/8” Kick Out with ½” Hem tooling included in the base machine. Built with “symmetrically designed tooling” to have your profile forming on the top or the bottom of the coil. Interchange the tooling, i.e., form Flat Hem on one side and Kick Out w/ Hem on the other. AC Drive Motor System (Sheet Fed / No Shear), adjustable coil stock width of 8” to 36”, variable to 80 FPM speed, 220 Volt 3 Phase power.

NOTE: Quick Change tooling in base machine (No hardware, No wrench, spring loaded push/pull pins)

QH-75 Quick Hem for Single Side Drip Edge Hemming

Our 3/4″ QuickHem machine This machine is a real time-saver for your production requirements allowing you to hem and fabricate metal on your schedule and not someone else’s!

The benchtop QuickHem machine eliminates much of the time-consuming brake work with the hem and kick in the fabrication of gravel stop, drip edge and coping. Ideal for roofing contractors, sheet metal fabricators, and HVAC shops. Form your hem/kick and finish it to the desired shape with your brake.