Showing all 4 results

Show sidebar

QH-50 Quick Hem for Single Side Drip Edge Hemming

Our standard 9/16″ QuickHem machine This machine is a real time-saver for your production requirements allowing you to hem and fabricate metal on your schedule and not someone else’s!

The benchtop QuickHem machine eliminates much of the time-consuming brake work with the hem and kick in the fabrication of gravel stop, drip edge and coping. Ideal for roofing contractors, sheet metal fabricators, and HVAC shops. Form your hem/kick and finish it to the desired shape with your brake.

QH-75 Quick Hem for Single Side Drip Edge Hemming

Our 3/4″ QuickHem machine This machine is a real time-saver for your production requirements allowing you to hem and fabricate metal on your schedule and not someone else’s!

The benchtop QuickHem machine eliminates much of the time-consuming brake work with the hem and kick in the fabrication of gravel stop, drip edge and coping. Ideal for roofing contractors, sheet metal fabricators, and HVAC shops. Form your hem/kick and finish it to the desired shape with your brake.

UH-24 24 Inch Universal Hemmer with Flat Hem and Hem Kick

Our Universal Hemming (UH) machines are real time savers to your production requirements allowing you to form Hems, Hem & Kick, and Pipe Lock for commercial down spouting.

The “Universal Hemming” Machines offer Dual Sided Hemming with ½” Flat Hem or Tear Drop Hem and the Hem & Kick with a 5/8” Kick Out with ½” Hem tooling included in the base machine. Built with “symmetrically designed tooling” to have your profile forming on the top or the bottom of the coil. Interchange the tooling, i.e., form Flat Hem on one side and Kick Out w/ Hem on the other. AC Drive Motor System (Sheet Fed / No Shear), adjustable coil stock width of 8” to 24”, variable to 80 FPM speed, 220 Volt 3 Phase power.

NOTE: Quick Change tooling in base machine (No hardware, No wrench, spring loaded push/pull pins)

UH-36 36 Inch Universal Hemmer with Flat Hem and Hem Kick

Our Universal Heming machines are real time savers to your production requirements allowing you to form Hems, Hem & Kick, and Pipe Lock for commercial down spouting. Fabricate metal on your schedule and not someone else’s!

The “Universal Hemming” Machines offer Dual Sided Hemming with ½” Flat Hem or Tear Drop Hem and the Hem & Kick with a 5/8” Kick Out with ½” Hem tooling included in the base machine. Built with “symmetrically designed tooling” to have your profile forming on the top or the bottom of the coil. Interchange the tooling, i.e., form Flat Hem on one side and Kick Out w/ Hem on the other. AC Drive Motor System (Sheet Fed / No Shear), adjustable coil stock width of 8” to 36”, variable to 80 FPM speed, 220 Volt 3 Phase power.

NOTE: Quick Change tooling in base machine (No hardware, No wrench, spring loaded push/pull pins)