SS20-A 2 Inch Armco Type Panel with Hydraulic Drive and Shear

The SS20A – 2″ Roof Panel is one of the most used Commercial Panels in the Metal Construction Industry.

This machine is complete with hydraulic drive and front hydraulic scissors shear, stiffening and striation ribs are included. The panel width is adjustable from 12” to 20”. It has 416 grade stainless steel forming rolls, 303 grade 1 ½” Ø stainless steel shafts with sealed bearings, and runs at 50 FPM speed. Striation Rib and Stiffening Rib Flat (2) are on separate stages. The Power requirement is 5 HP 220 Volt 5 GPM 1 Phase or 3 Phase.

Add to quote
Category:
Description

Standard Features

  • Hydraulic Drive and Hydraulic Scissors Shear
  • Produces 12’’- 20’’ finished Panels
  • Stiffening Ribs (2)
  • Striation Rib Stage
  • 303 Grade 1.5’’ diameter stainless steel shafts with sealed bearings
  • 416 Grade Stainless Steel Forming Roll
  • 50 FPM

 

Capacities

  • 24-22 ga. Painted Steel
  • .032” – .040” Painted Aluminum 

Options & Accessories

  • Digital Controller for fully automatic operation,+/- 1/10” accuracy 
  • SS Industrial Seamer “Kit”
  • Double Lock 2nd stage hand tool 
  • 3000 and 5000 Lbs. capacity Decoilers to hold your coil stock
  • Machine Stand with Leveler Pads for shop use
  • Double Lock 2nd stage hand tool 

 

Power

  • 7 1/2 HP 220V 5 GPM Single Phase or 3 Phase Power

Standard Profiles

Related products

SLP-175 Self-Locking Panel Former with Hydraulic Drive and Shear

SLP – 175 Machine produces one of the most popular commercial metal roof panels in the industry, the 1 ¾” Snap Lock Panel.

The SLP-175 is an adjustable width machine for 12″ to 20″ panels with a 6″ “material use”. Complete with electric – hydraulic drive and front hydraulic scissors shear and a single batch Digital Controller for fully automatic operation. This machine has the option for Stiffening or Striation Ribs.

The machine is powered with a 5 HP 220 Volt 1 or 3 Phase power unit for 22 – 24 gauge Painted Steel – .032″ Painted Aluminum capacity.

NSP Nail Strip Panel with Hydraulic Drive and Shear

Our Nail Strip Panel Machine, or NSP, is the perfect panel for the residential market. It snaps together and requires no clips or seaming. It works great with an inexpensive 28 gauge. material. The additional advantage of no external fastener makes this profile unbeatable.

The NSP – 1” profile was originally made popular in the Pacific Northwest part of the US. This panel is a very attractive residential panel that lends itself to the ease of installation – no seaming, no roof clips needed. Lay it down and screw it to the deck while snapping one panel over the other! It is also ideal for Lumber Yards and Suppliers to sell this panel to local roofing contractors and homeowners who desire a metal roof but without the need of seaming and the roof clips.

This machine comes complete with a hydraulic drive and front hydraulic scissors shear, a Digital Controller for fully automatic operation, adjustable panel width capability of 12” to 20”, nail strip slotting die stage with 3/16” wide by ¾” long slots every 2” O.C. The “material use” on this profile is 5 ¼”.