NSP Nail Strip Panel with Hydraulic Drive and Shear

Our Nail Strip Panel Machine, or NSP, is the perfect panel for the residential market. It snaps together and requires no clips or seaming. It works great with an inexpensive 28 gauge. material. The additional advantage of no external fastener makes this profile unbeatable.

The NSP – 1” profile was originally made popular in the Pacific Northwest part of the US. This panel is a very attractive residential panel that lends itself to the ease of installation – no seaming, no roof clips needed. Lay it down and screw it to the deck while snapping one panel over the other! It is also ideal for Lumber Yards and Suppliers to sell this panel to local roofing contractors and homeowners who desire a metal roof but without the need of seaming and the roof clips.

This machine comes complete with a hydraulic drive and front hydraulic scissors shear, a Digital Controller for fully automatic operation, adjustable panel width capability of 12” to 20”, nail strip slotting die stage with 3/16” wide by ¾” long slots every 2” O.C. The “material use” on this profile is 5 ¼”.

Add to quote
Category:
Description

Standard Features

  • 13 Forming Stages
  • Produces 12” to 20” Finished Panels 
  • Hydraulic Drive and Front Hydraulic Scissors Shear
  • 40 FPM Speed
  • Digital controller for fully automatic operation,+/- 1/10” accuracy 
  • Nail strip slotting die stage with 3/16″ wide by ¾” long slots every 2″ O.C. 
  • #40 Chain and Sprocket/ Spur Drive
  • Machine Length – 13′
  • The “material use” on this profile is 5¼”

Options & Accessories

  • 3,000 or 5,000 Lbs. Decoiler to hold your coil stock
  • Machine Stand with 4 corner leveler pads for in shop use

Power

  • 3 HP Electric-Hydraulic Power Unit, 110V, Single Phase with 16 cu in drive motor

Capacities

  •   26-28 ga. Painted Steel 
  •   12-16 oz. Copper

Standard Profile

Related products

SSSP-3 3 Inch Trapezoidal Pan, Double Lock Seam with Hydraulic Drive and Shear

This panel profile is one of the most popular structural panels used in today’s metal roofing industry; whether it’s a “Pre-Engineered” building or a Commercial / Industrial roof to be replaced, this trapezoidal panel machine gives you the combination of strength and the watertight integrity of a “double lock” 3″ tall standing seam. Snap Lock seams are also available.

The machine is complete with a hydraulic drive and front hydraulic scissors shear,  A digital controller for fully automatic operation, adjustable panel widths of 12″ to 24″, and two (2) Stiffening Ribs.

VS-150 Standing Seam Panformer with Hydraulic Drive and Shear

The VS-150 machine is equipped with hydraulic drive and front hydraulic scissors shear, 110 volt – 1 phase power, 40 FPM speed. It produces the 1″ and 1 1/2″ Standing Seam profile and “U-Panels in the base model machine, adjustable width panels of 9″ to 24”.

The VS-150 is also a “Multi-Profile” capable piece of machinery forming 7 different profiles in total. From Snap Lock styles to true Board and Batten and Bermuda Roof profiles. The versatility is built into the design of the machine but most importantly the changeover time is anywhere from 15 minutes to 1 hour. You can purchase these optional dies at anytime! A Digital Controller for fully automatic operation is also available and highly recommended for increased production.