SSSP-3 3 Inch Trapezoidal Pan, Double Lock Seam with Hydraulic Drive and Shear

This panel profile is one of the most popular structural panels used in today’s metal roofing industry; whether it’s a “Pre-Engineered” building or a Commercial / Industrial roof to be replaced, this trapezoidal panel machine gives you the combination of strength and the watertight integrity of a “double lock” 3″ tall standing seam. Snap Lock seams are also available.

The machine is complete with a hydraulic drive and front hydraulic scissors shear,  A digital controller for fully automatic operation, adjustable panel widths of 12″ to 24″, and two (2) Stiffening Ribs.

Add to quote
Category:
Description

Standard Features

  • Produces 12” to 24” finished panels
  • Hydraulic drive
  • Hydraulic powered front scissors shear
  • Siemens Controller +/- 1/10” accuracy
  • 416 grade stainless steel forming rolls
  • 303 grade 1 ¼” Ø stainless steel shafts with sealed bearings
  • 40 – 50 FPM speed
  • Stiffening Rib Flat (2) on separate Stage

Capacities

  • 22 – 24 ga. Painted Steel
  • 0.032” – 0.040″ Painted Aluminum

Options & Accessories

  • SSX – Heavy Duty Power Seamer
  • 3,000 or 5,000 Lbs. Decoiler to hold your coil stock
  • Machine Stand with leveler pads for in shop use
  • Hot Melt Caulk System

Power

  • Electric-Hydraulic 7 ½ HP 220 Volt 1 or 3 Phase with dual 20 cu. In. Drive Motors 
  • # 40 Chain & Sprocket / Spur Gear Drive

Standard Profile

Related products

VS-150 Standing Seam Panformer with Hydraulic Drive and Shear

The VS-150 machine is equipped with hydraulic drive and front hydraulic scissors shear, 110 volt – 1 phase power, 40 FPM speed. It produces the 1″ and 1 1/2″ Standing Seam profile and “U-Panels in the base model machine, adjustable width panels of 9″ to 24”.

The VS-150 is also a “Multi-Profile” capable piece of machinery forming 7 different profiles in total. From Snap Lock styles to true Board and Batten and Bermuda Roof profiles. The versatility is built into the design of the machine but most importantly the changeover time is anywhere from 15 minutes to 1 hour. You can purchase these optional dies at anytime! A Digital Controller for fully automatic operation is also available and highly recommended for increased production.

SS20-A 2 Inch Armco Type Panel with Hydraulic Drive and Shear

The SS20A – 2″ Roof Panel is one of the most used Commercial Panels in the Metal Construction Industry.

This machine is complete with hydraulic drive and front hydraulic scissors shear, stiffening and striation ribs are included. The panel width is adjustable from 12” to 20”. It has 416 grade stainless steel forming rolls, 303 grade 1 ½” Ø stainless steel shafts with sealed bearings, and runs at 50 FPM speed. Striation Rib and Stiffening Rib Flat (2) are on separate stages. The Power requirement is 5 HP 220 Volt 5 GPM 1 Phase or 3 Phase.